This valve is a standard bayonet style valve for industrial batteries.
WIDEST PRESSURE RANGE - The valves operate with pressure from 3-35 PSI using our filling devices. House static pressure should never be more than 90 PSI. If needed, a variety of pressure regulators are available to lower pressure.
5 YEAR WARRANTY -The valves are warranted for a full five years (fast charge for three years). If a valve causes a cell failure due to a manufacturing defect, the valve and the cell will be repaired or replaced.
FASTER - With less time spent watering batteries, employees will have more time to take care of other responsibilities.
SAFER - The internal working components of the valve are above the cells, keeping them out of the electrolyte. The level indicator eye verifies proper valve operation. Valves should only be removed during routine maintenance, eliminating the risk of battery acid exposure or damaging floors and equipment.
BETTER - Battery Watering Technologies’ valves add the correct amount of water every time. With proper battery maintenance, you can add years to the life of your batteries.
Hydrometer readings can be taken without removing the valve from the battery. The hydrometer opening has a slider with a stop so the covering won't break or get lost.
The tubing barbs eliminate the need for clamps, and they are angled to make installation easy in tight configurations.
The z-Lock feature integrates the tee piece with the valve for added strength.
This unique indicator eye is visible from the top and side. It confirms proper operation of the valve.
The unique valve design reduces the risk of damage from battery cables.
Installation is fast and easy: Gently push the valve into the vent well to install. No twisting is necessary to lock the valve in place.
Reinforced encapsulation protects the float and eliminates interference with the moss shield.
Acid, temperature and impact resistant float is solidly constructed and cannot absorb water.
Everything is provided for the kit, however the tubing is not cut or attached to any of the valves.
All kits ship with our standard blue connector (09MBLU1) and black tubing (08TUB6BLK) unless specified in writing on the order.
To order a competitor connector on the end of the kit, add suffix F-09FUV6, P-09PHISCI-6, G-09GRM6, W-09CUV6
(Example: K1200TB4G for a 12 cell kit with Grey/BFS 09GRM6 connector).
|# OF CELLS||PART NUMBER|
We pride ourselves in unrivaled customer service. If you have any questions about our products, please reach out today!
Toll Free: 1-877-522-5431