This is our standard Direct Fill Link+ with a 20' (6 m) hose and strainer that works with Battery Watering Technologies low profile watering systems that have the 09MBLU1 or 09MBLU2 quick connects.
Not recommended for use with Philadelphia Scientific® injector systems or Watermaster® systems.
The Direct Fill Link Plus combines the original Direct Fill Link and equips it with our patent pending flow meter. This allows the Direct Fill Link Plus to provide real-time data of the amount of water you are putting into each battery at each watering cycle.
Depending on the water quality, the Direct Fill Link Plus can be connected to a standard garden hose, a deionizer, or an Aqua Sub cart to put water directly into the batteries. The Direct Fill Link Plus has a built-in flow indicator and pressure regulator, reducing pressure down to 10 PSI. It can handle up to 90 PSI from the water source.
Water sources with greater pressure should use a brass pressure regulator to reduce incoming pressure.
The Flow Meter is Bluetooth enabled allowing it to operate freely with or without internet access.
You can use this device on its own and record the data manually or pair it with our custom designed software FRED. Pairing the Direct Fill Link Plus with FRED will allow you to automatically populate the watering information into our software program without any extra effort. This will allow you to track when a battery is suddenly accepting more or less water than it typically does and flag it for a potential problem.
The Direct Fill Link Plus is smaller, more robust, and less cumbersome to handle than traditional watering guns. The ergonomic streamlined design makes it comfortable to use.
The Direct Fill Link Plus operates like a watering gun. Without a lock on the handle, it is safer to operate. There is no chance that the battery will continue to be filled if the user walks away while filling.
The flow indicator is encased in PVC pipe making it more robust and extremely durable.
The flow rate is fast enough for the largest batteries, yet gentle enough to fill accurately each and every time. The Direct Fill Link Plus reduces pressure down to 10 PSI and will handle incoming pressure up to 90 PSI.
Just connect the Direct Fill Link Plus to a standard garden hose. When filling, watch for the flow indicator to stop spinning, then disconnect it from the system.
|
Operating Temperature: +32oF to +120oF (0oC to +48oC) Storage Temperature: +32oF to +120oF (0oC to +48oC) Internal Power Supply: (2) Alkaline AAA batteries @ 1.5-volts each Battery Life: 1+ years Flow Rate Range: 0.25-3.0 gallons/minute or 1-11 liters/minute Warranty: 1 year |
Filter Screen
Front End Replacement for DF72
Flow Indicator
Handle
Female Quick Connect
Quick Connect Male Adapter
10 PSI Pressure Regulator
Gasket
Flow Meter
We pride ourselves in unrivaled customer service. If you have any questions about our products, please reach out today!
Toll Free: 1-877-522-5431
Phone: 336-714-0448
Inquiry: freeinfo@batterywatering.com
