To protect your equipment and extend the life of your batteries, the deionizer kit from Battery Watering Technologies can easily and inexpensively remove harmful impurities from the water. Dissolved impurities in standard tap water will degrade your batteries and decrease battery life and performance over time. The system is cost effective and easy to use.
How much capacity can you get from the cartridge? It depends on the quality of your water. If water has particulates or sediment, a pre-filter is recommended. At three grains per gallon of total dissolved solids you can expect 1000 gallons or 3785.4 liters of capacity. If you want a more exact answer, just send a sample of your water and we can tell you the approximate gallons of capacity you can expect from our deionizer.
Our deionizer comes with an input and output hose. It connects to your choice of Direct Fill Link, Manual Watering Gun, or an approved competitor filling device.
Note: This is not a filter. Never use for drinking water.
This Water Deionizer is AC powered.
For DC power please click here.
Simply attach the bracket to a wall with four bolts. Connect the input hose to your water supply. Install the purity light and insert the probe into the fitting on top of the housing. Mount the display on the back of the mounting bracket.
Push the test button to monitor the water output and determine when the cartridge needs to be replaced. ”Good” indicates cartridge does not need to be replaced. “Service” indicates cartridge replacement is needed.
No tools are needed. To replace the cartridge, turn off supply, unscrew the canister and put the new one in. The old cartridge is non-toxic and can be disposed easily.
MAX INLET PRESSURE - 100 PSI
SHIPPING WEIGHT - 28 lbs (12.7 kg)
WATER DEIONIZER KIT - Part# PW-1800AC includes 12’ (3.66 m) hose to delivery system and 6’ (1.83 m) hose to the water supply.
Delivery Hose - 12' (3.66 m)
Fittings included for outlet of deionizer
(Hose to delivery system)
PW-1800 Deionizer Replacement Cartridge
Deionizer Replacement cartridge is not compatible with other brands
5/8" Hose Bar x Female GHT
O-ring gasket
for PW-1800 Housing
Deionizer Case Housing
Hose Clamp
3/8" to 7/8"
(10 mm to 22.22 mm)
Braided Hose
5/8" (15.8 mm)
(sold by the foot)
Fittings sold separately
Purity Light Replacement for
Battery Operated (DC) Unit
Housing Tool used to
tighten lid on housing
Water Quality Tester
We pride ourselves in unrivaled customer service. If you have any questions about our products, please reach out today!
Toll Free: 1-877-522-5431
Phone: 336-714-0448
Inquiry: freeinfo@batterywatering.com
